
The AirTAC SAID200 Double Rod Cylinder SAID200BX105 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 105mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X105 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 200 mm bore and 105 mm stroke. Because the piston rod exits both end covers, the annulus area is identical on extend and retract, yielding a balanced 15079 N of force in either direction at 0.5 MPa. This symmetric output is ideal for mechanisms requiring equal push and pull dynamics.
This specific configuration utilizes a SUS304 stainless steel rod (option B) for superior corrosion resistance and includes PT tapered port threads. The extruded aluminum barrel features sensor grooves on both sides for flexible mounting of position switches. Note that a double-rod design requires extra rear clearance to accommodate the protruding secondary rod end.
| Model | Airtac SAID200 Double Rod Cylinder SAID200BX105 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives heavy transfer carriages requiring identical push and pull thrust, using the 15079 N both-way output to maintain consistent momentum across direction changes.
Employs the dual-rod guidance to keep heavy tooling platforms perfectly aligned and prevent torsional twist during vertical or horizontal actuation.
Mounts the primary workpiece on the front rod and a secondary cam or position flag on the rear rod to trigger external limit switches in a synchronized process.
Select this 200 mm bore size when an application demands heavy symmetric force that a smaller bore cannot provide, stepping up from the 160 mm class which yields 9425 N at 0.5 MPa. The twin-rod architecture is chosen over a single-rod SAI when the mechanism requires dual-side guidance to prevent rotation, or when a rear flag is needed to trigger an external sensor. Mounting options are limited to the SAID set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Ensure the rear rod path is clear of obstructions. Remember that the adjustable air cushions only decelerate the piston near stroke end; this cylinder will drift if air pressure is lost. For applications requiring true load holding without live pressure, consider a BSAID clamp-lock variant or an external pilot-operated check valve. To add position sensing, order the -S magnet option for compatibility with CMSE reed and DMSE electronic switches.
Quick checklist
Because the rod occupies both sides of the piston, the effective area is equal in both directions. The cylinder provides 15079 N of force both extending and retracting at 0.5 MPa, and 21110 N at 0.7 MPa.
Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders. However, the SAID series uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits the FB, CA, CB, and CR brackets found on single-rod variants.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.