
The AirTAC SAID200 Double Rod Cylinder SAID200BX400 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 400mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X400 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 200 mm bore and 400 mm stroke. Because the piston rod exits both end covers, the annulus area is identical on both sides, yielding perfectly symmetrical thrust. It generates 15079 N of force in both extend and retract directions at 0.5 MPa.
This unit is configured with SUS304 stainless steel rods (code B) for superior corrosion resistance and features PT tapered port threads. The twin rods allow you to mount a primary workpiece on one end and a position flag or cam on the rear, providing dual-side guidance and excellent anti-rotation stability for heavy loads.
| Model | Airtac SAID200 Double Rod Cylinder SAID200BX400 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Utilizes the equal 15079 N extend and retract force at 0.5 MPa to perform identical work strokes in both directions on large industrial assemblies.
Mounts tooling on the front rod and a synchronized second mechanism on the rear rod to actuate two separate stations simultaneously from one cylinder.
Leverages the dual SUS304 rods to keep heavy 200 mm bore loads perfectly guided against twisting forces without relying solely on external rails.
Select this 200 mm bore model when an application demands massive bidirectional force that a smaller bore cannot provide, such as stepping down from a non-standard setup to leverage its 15079 N both-way capacity at 0.5 MPa. A double-rod design is preferred over a single-rod SAI when you need equal push and pull speeds or require rear-rod actuation. Note that a plain SAID does not hold position if air pressure is lost; for dead-load holding, consider an external rod lock or the BSAID clamp-lock variant.
At 400 mm of stroke, the long unsupported rod span requires an external guide to prevent rod-bearing bending under high side loads. This cylinder is dimensionally interchangeable per ISO 15552 and uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR brackets found on single-rod versions. Ensure your layout accommodates the extra rear-rod protrusion clearance.
Quick checklist
Because it is a double-rod cylinder, the effective piston area is the same on both sides. It outputs 15079 N in both the extend and retract directions at 0.5 MPa, and 21110 N at 0.7 MPa.
Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders. However, the SAID series uses a specific mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It does not support FB, CA, CB, or CR brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.