
The AirTAC SAID200 Double Rod Cylinder SAID200BX45S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 45mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X45-S is a double-acting, double-rod ISO 15552 profile cylinder engineered for heavy-duty symmetrical motion. Because the piston rod exits both end covers, the effective annulus area is identical on extend and retract. This yields equal force and speed in both directions, providing 15079 N of thrust and pull simultaneously at 0.5 MPa.
Equipped with a magnet for position sensing, this variant utilizes SUS304 stainless steel rods (code B) for superior corrosion resistance. The rear rod end can drive a secondary mechanism or mount a cam, while the PT tapered ports ensure robust pneumatic connections. It operates at speeds of 30-500 mm/s and features adjustable air cushions at both ends to decelerate the massive load near stroke limits.
| Model | Airtac SAID200 Double Rod Cylinder SAID200BX45S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives heavy industrial presses or forming stations where the 15079 N clamping force must remain perfectly identical in both advance and retract strokes.
Handles massive structural components with twin rods exiting both covers, preventing torsional twist without relying solely on external linear bearings.
Mounts a primary work tool on the front rod and a secondary position flag or cam on the rear rod to trigger sequential operations in large assembly machinery.
Select this 200 mm bore cylinder when an application demands immense bidirectional force that a single-rod SAI cannot provide symmetrically. If the 15079 N output at 0.5 MPa is excessive, stepping down to the 160 mm bore offers 9425 N both ways. Conversely, if you need less force, the 125 mm bore provides 5734 N. The twin-rod design inherently resists rotation and guides the load far better than a single rod, though external guidance is still recommended for offset payloads.
As a true ISO 15552 profile cylinder, it serves as a direct replacement for other ISO 15552 double-rod cylinders, utilizing mounting accessories from the SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the adjustable air cushions only decelerate the piston near stroke end; they do not hold the load. If position holding is required without live air pressure, consider an external rod lock or the BSAID clamp-lock variant. The -S magnet works seamlessly with AirTAC CMSE reed and DMSE electronic sensors.
Quick checklist
Because it is a double-rod cylinder, the force is identical in both directions. It provides 15079 N at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa for both extension and retraction.
No, the standard SAID does not hold position without live pressure. The adjustable air cushions only decelerate the piston near the stroke ends. For fail-safe holding, you would need an external rod lock or the BSAID double-rod clamp-lock variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.