verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID200 Double Rod Cylinder SAID200BX500

The AirTAC SAID200 Double Rod Cylinder SAID200BX500 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 500mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ200 mm
  • Stroke500 mm
  • Port sizeG3/4
  • Acting typeDouble acting
  • Rod threadM36×2
  • CushionAdjustable, 50 mm
$1,056.13 $1,131.11Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAID200 stroke, mounting and version on one page All SAID200 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAID200 Double Rod Cylinder SAID200BX500

The AirTAC SAID200X500 is a double-acting, double-rod ISO 15552 profile cylinder engineered for heavy-duty symmetrical actuation. Because the SUS304 stainless steel rod exits both end covers, the annulus area is identical on extend and retract, yielding an equal 15079 N of force each way at 0.5 MPa. This through-rod geometry provides superior anti-rotation guidance and allows a secondary tool or position flag to be mounted on the rear extension.

Built with PT tapered port threads and a 40 mm rod diameter, this 200 mm bore variant handles substantial side loads while operating at 30-500 mm/s. The extruded aluminum barrel features dual sensor grooves, and adjustable air cushions at both ends decelerate the massive piston smoothly. Note that the through-rod design increases the overall length, requiring extra rear clearance in your machine layout.

Airtac SAID200 Double Rod Cylinder SAID200BX500 Technical Specifications

ModelAirtac SAID200 Double Rod Cylinder SAID200BX500
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ200 mm
Stroke500 mm
Acting typeDouble acting
Port sizeG3/4
Rod threadM36×2
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionAdjustable, 50 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø200mm)

PressurePush forcePull force
0.5 MPa15080 N15080 N
0.7 MPa21111 N—
Max (@1.0 MPa)3075 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID200 Double Rod Cylinder SAID200BX500

SAIISO 15552 profile-barrel cylinder series.
200Bore size in mm.
×500Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID200 Double Rod Cylinder SAID200BX500 Is Used

sync_alt

Symmetric-Force Transfer

Drives heavy workpiece shuttles where the 15079 N push and pull forces must be perfectly matched to maintain consistent cycle dynamics in both directions.

straighten

Anti-Rotation Slides

The twin 40 mm SUS304 rods provide exceptional torsional resistance, keeping large precision slides perfectly aligned without twisting under offset loads.

settings_input_component

Twin-Station Actuation

Mounts a primary work tool on the front rod end and a secondary cam or position flag on the rear protrusion to trigger external limit switches simultaneously.

Is the Airtac SAID200 Double Rod Cylinder SAID200BX500 the Right Cylinder?

Select this 500 mm stroke model when an application demands perfectly balanced push and pull forces, stepping up from a 160 mm bore (which provides 9425 N at 0.5 MPa) to handle loads up to 15079 N each direction. A double-rod configuration is preferred over a single-rod SAI when you need to drive twin mechanisms simultaneously or require precise anti-rotation stability for a heavy guided load. As a true ISO 15552 profile cylinder, it serves as a direct replacement for other standard double-rod units.

For a 500 mm stroke, the 40 mm rod and large piston mass create significant bending moments; an external guide rail is strongly recommended to prevent rod-bearing wear. If the load must be held without live air pressure, note that the standard air cushions only decelerate the piston and do not lock it—consider a BSAID clamp-lock variant or an external pilot-operated check valve. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID200 Double Rod Cylinder SAID200BX500 FAQ

Because the rod occupies both sides of the piston, the effective area is equal in both directions. It delivers 15079 N of force at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa for both extension and retraction.

Yes, the SAID200X500 is dimensionally interchangeable per ISO 15552 and uses the standard mounting interface set (Basic, FA, LB, TC, FTC, TCM1, TCM2). It is an extruded aluminum profile cylinder, not a tie-rod design.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID200 Double Rod Cylinder SAID200BX500

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAID200BX500 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.