
The AirTAC SAID200 Double Rod Cylinder SAID200X105 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 105mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X105 is a double-acting, double-rod ISO 15552 profile cylinder engineered for heavy-duty symmetrical actuation. Because a carbon steel rod exits both end covers, the annulus area is identical on each side, yielding an equal extend and retract force of 15079 N at 0.5 MPa. This through-rod architecture provides superior anti-rotation guidance and allows a secondary mechanism or position flag to be driven from the rear.
Fluid compatibility is limited to filtered air (40 um) with an operating pressure range of 0.15-1.0 MPa. The extruded aluminum barrel incorporates sensor grooves on both sides for flexible mounting of CMSE or DMSE switches, though this specific configuration ships without a magnet. Adjustable air cushions at both ends absorb kinetic energy, and the unit uses PT tapered port threads sized at G3/4.
| Model | Airtac SAID200 Double Rod Cylinder SAID200X105 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Applies 15079 N of equal force in both directions for heavy-duty pressing and forming operations where identical push and pull strokes are required.
Drives two separate mechanisms simultaneously from a single piston, using one rod end for the primary workpiece and the opposite end for a secondary synchronized tool.
Keeps heavy guided loads perfectly aligned without rotational drift, leveraging the dual-rod geometry to stabilize massive structural movements.
Selecting this 200 mm bore model is appropriate when an application demands massive bidirectional thrust that is perfectly balanced, stepping up from a 160 mm bore (9425 N at 0.5 MPa) to achieve 15079 N each way. A twin-rod design is chosen over a single-rod SAI when the load requires dual-side guidance to prevent torsion, or when a rear cam must trigger an external limit switch. Mounting options are restricted to the SAID subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR brackets found on single-rod variants.
This cylinder is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 double-rod cylinders. Note that the variable air cushions only decelerate the piston near stroke end; they do not lock the load. If the mechanism must hold position without live air pressure, an external rod lock or a BSAID clamp-lock cylinder is required. Because the rear rod protrudes continuously, ensure adequate clearance behind the rear cover.
Quick checklist
The SAID200X200 delivers 15079 N of force at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa. Because it is a double-rod cylinder, these pull-side force figures are identical for both the extend and retract strokes.
Yes, the SAID200X105 is a true ISO 15552 profile cylinder, making it dimensionally interchangeable with other ISO 15552 double-rod cylinders. It shares the standard mounting interface and utilizes a G3/4 PT port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.