
The AirTAC SAID200 Double Rod Cylinder SAID200X190 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 190mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X190 is a double-acting, double-rod profile cylinder built to ISO 15552 dimensional standards. Because the piston rod exits both end covers, the effective annulus area is identical on the extend and retract strokes. This yields perfectly symmetric force and speed, providing 15079 N of output in each direction at 0.5 MPa.
This 200 mm bore unit features a robust 40 mm carbon steel rod and PT tapered port threads. The through-rod design allows engineers to mount the primary workpiece on the front end while utilizing the rear rod end for external cam actuation, position flags, or secondary mechanism drives. It includes adjustable air cushioning at both ends to absorb kinetic energy, though an external guide is recommended to manage side loads.
| Model | Airtac SAID200 Double Rod Cylinder SAID200X190 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for heavy press or transfer operations requiring identical push and pull forces, utilizing the 15079 N both-way capacity at 0.5 MPa without speed variations.
The twin-rod architecture prevents piston rotation during extension, providing precise linear guidance for heavy material handling slides and lifting rigs.
The protruding rear rod end drives secondary mechanisms or triggers mechanical limit switches independently from the front-side primary work tool.
Selecting this 200 mm bore cylinder makes sense when an application demands massive bidirectional force that a single-rod SAI cannot provide symmetrically. If you need less force, stepping down to the 160 mm bore drops the both-way output to 9425 N at 0.5 MPa. Choose the SAID200X190 specifically when you need to drive twin loads, maintain strict anti-rotation control, or mount rear-position sensing hardware.
For direct compatibility, ensure your setup matches the ISO 15552 mounting interface using Basic, FA, LB, TC, FTC, TCM1, or TCM2 accessories. Note that FB, CA, CB, and CR mounts are omitted from this double-rod variant. Since the stroke is 190 mm, side-load risks are moderate, but the heavy 40 mm rod handles bending stress well; always verify external guidance for heavy payloads. Remember that the adjustable air cushions only decelerate the piston near stroke end and will not hold a load if air pressure is lost—use a SAIL or BSAID lock variant if static holding is required.
Quick checklist
Because it is a double-rod cylinder, the force is identical in both directions. It provides 15079 N at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa.
Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders. It supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, but omits FB, CA, CB, and CR configurations.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.