
The AirTAC SAID200 Double Rod Cylinder SAID200X280S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 280mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X280-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 200 mm bore and 280 mm stroke. Because a carbon steel rod exits both end covers, the annulus area is identical on extend and retract, yielding equal force and speed in both directions. This through-rod design generates 15079 N each way at 0.5 MPa and 21110 N at 0.7 MPa.
Equipped with a -S magnet, this unit supports AirTAC CMSE reed and DMSE solid-state sensors mounted in the dual side grooves of the extruded aluminum barrel. The rear rod end is perfect for mounting a cam, position flag, or secondary mechanism, providing superior anti-rotation guidance compared to single-rod actuators.
| Model | Airtac SAID200 Double Rod Cylinder SAID200X280S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides matched extension and retraction forces for heavy pressing and forming tasks where equal push and pull power is mandatory.
Drives dual-station transfer arms with identical force and speed in both directions, preventing asymmetric load drift.
Uses the twin through-rods to guide heavy sliding mechanisms, resisting torsional twist without external guide rails.
Choose this 200 mm bore when the 160 mm class (9425 N at 0.5 MPa) is insufficient for your heavy-duty cycle. The twin-rod architecture is selected over a single-rod SAI when a symmetrical transfer force is required, or when a rear-mounted limit flag must trigger a sensor at the opposite end. It uses a PT tapered G3/4 port and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Note that standard adjustable air cushions only decelerate the piston near stroke end; they do not hold a load. If air pressure drops, the cylinder drifts, requiring an external rod lock or a BSAID clamp-lock for safety. With a 280 mm stroke, the long unsupported rod requires an external guide to prevent rod-bearing bending under side loads.
Quick checklist
The double-rod design provides equal force in both directions. It delivers 15079 N at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa.
Yes, it is dimensionally interchangeable per ISO 15552. It serves as a direct replacement for other ISO 15552 double-rod cylinders, utilizing a PT G3/4 port and standard mounting accessories.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.