
The AirTAC SAID200 Double Rod Cylinder SAID200X40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 40mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X40-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 200mm bore and 40mm stroke. Because a carbon steel rod extends from both end covers, the annulus area is identical on both sides. This yields equal push and pull forces, delivering 15079 N in both directions at 0.5 MPa and reaching 27141 N at 0.9 MPa.
Equipped with a magnet (-S), this variant supports AirTAC CMSE reed and DMSE electronic sensors via the dual-side barrel grooves. The through-rod design allows mounting a primary workpiece on one end and a cam or position flag on the rear, providing superior anti-rotation guidance for heavy loads.
| Model | Airtac SAID200 Double Rod Cylinder SAID200X40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Delivers 21110 N of equal force at 0.7 MPa for symmetric pressing and forming operations requiring high stability.
Drives two synchronized workstations simultaneously using both rod ends, ensuring perfectly matched motion and speed.
The dual-rod architecture prevents piston rotation, ideal for heavy-load sliding mechanisms that require strict linear orientation.
Choose this 200mm bore when an application requires massive bidirectional force matched with high structural stability. If you need less force, step down to the 160mm bore, which provides 9425 N each way at 0.5 MPa. The PT-tapered G3/4 porting handles high airflow to maintain the 30-500 mm/s speed range. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Select a double-rod over a single-rod SAI when you need to drive twin stations or prevent rotational drift. Note that this cylinder cannot hold a load without live air pressure; for locking requirements, consider the BSAID clamp-lock variant. As a dimensionally interchangeable ISO 15552 unit, it serves as a direct replacement for other standard profile cylinders.
Quick checklist
Because the double-rod design creates equal annulus areas on both sides, the output force is identical in extend and retract. It provides 15079 N at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa.
Yes. The SAID200X40-S is dimensionally interchangeable per ISO 15552 profile standards, meaning it matches standard mounting footprints and port locations for easy replacement.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.