
The AirTAC SAID200 Double Rod Cylinder SAID200X45S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 45mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X45-S is a double-acting, double-rod profile cylinder built to ISO 15552 dimensional standards. Because the piston rod exits both end covers, the effective annulus area is identical on extend and retract, yielding exactly 15079 N of force in both directions at 0.5 MPa. This through-rod geometry provides superior anti-rotation stability and allows you to mount a secondary tool or position flag on the rear extension.
Equipped from the factory with a magnetic piston (-S), this unit is ready for AirTAC CMSE reed and DMSE electronic solid-state sensors housed within the dual-side extruded barrel grooves. It features standard carbon steel rods, PT threaded ports sized at G3/4, and adjustable air cushioning at both ends to decelerate the massive 200 mm bore payload smoothly.
| Model | Airtac SAID200 Double Rod Cylinder SAID200X45S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Delivers 15079 N of equal force on both extend and retract strokes, ideal for precision pressing operations requiring identical push and pull loads.
The through-rod design allows driving one workpiece on the front while actuating a secondary mechanism or ejector on the rear simultaneously.
Twin rods exiting both ends provide exceptional resistance to torsional twisting, keeping heavy guided loads perfectly aligned without external rails.
Selecting this 200 mm bore cylinder makes sense when a process requires immense, perfectly symmetric force, as the twin-rod layout ensures push and pull outputs match exactly at 15079 N. If your application needs less force, stepping down to the 160 mm bore drops the bidirectional output to 9425 N at 0.5 MPa. Conversely, if you only need standard single-direction actuation, the single-rod SAI series provides a higher forward push force for the same footprint.
Remember that the adjustable air cushions only slow the piston near stroke end; they do not lock the load. If air pressure drops, the cylinder will drift, so add an external rod lock or explore the BSAID clamp-lock series for fail-safe holding. As a true ISO 15552 profile cylinder, it drops in interchangeably with other standard 200 mm double-rod units, utilizing the Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting accessories.
Quick checklist
Because it is a double-rod cylinder, the force is identical in both directions due to equal annulus areas. It generates 15079 N at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa.
No, the standard adjustable air cushions only decelerate the piston at the end of the stroke and do not act as a brake. If you need to hold a load without live air pressure, you must use an external pilot-operated check valve or switch to the BSAID double-rod clamp-lock series.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.