
The AirTAC SAID200 Double Rod Cylinder SAID200X85S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 85mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X85-S is a double-acting, double-rod ISO 15552 profile cylinder engineered for heavy-duty symmetric actuation. A single piston drives a carbon steel rod out of both end covers, yielding exactly 15079 N of force in both extend and retract directions at 0.5 MPa. This equal annulus area eliminates speed and force discrepancies between strokes.
Equipped with a magnetic piston (-S), this variant supports AirTAC CMSE reed and DMSE electronic sensors housed within the dual side grooves on the extruded aluminum barrel. The rear rod extension is ideal for mounting a secondary cam or position flag, while the PT G3/4 tapered ports ensure high-volume airflow for its 30-500 mm/s operating range.
| Model | Airtac SAID200 Double Rod Cylinder SAID200X85S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides 15079 N of equal thrust in both directions, ideal for pressing and returning heavy components without force variation.
Uses both rod ends to actuate two separate workstations simultaneously, ensuring perfectly synchronized movement.
The dual-rod design prevents mechanical twisting during vertical lifts, maintaining precise load orientation.
Selecting this 200 mm bore over a smaller neighbor like the 160 mm (which provides 9425 N at 0.5 MPa) is necessary when applications demand massive, balanced thrust. The twin-rod architecture is chosen over a single-rod SAI when the mechanism requires dual-side guidance to prevent rotation, or when a rear rod is needed to drive a secondary mechanism. Because the 85 mm stroke is relatively short for this bore, side-load bending is minimal, but external guides remain recommended for heavy lateral loads.
For direct replacements, verify the ISO 15552 mounting dimensions, 85 mm stroke, PT G3/4 ports, and the -S magnet. Note that standard air cushions only decelerate the piston near stroke end; they do not hold the load. If static holding is required without live air pressure, consider a BSAID clamp-lock cylinder or an external pilot-operated check valve.
Quick checklist
Because the rod exits both ends, the effective piston area is identical in both directions. It delivers 15079 N at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa for both extend and retract strokes.
Yes, the SAID200X85-S is dimensionally interchangeable per ISO 15552. Ensure your mounting hardware matches the SAID accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and account for the rear rod protrusion clearance.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.