Airtac SAID32 Double Rod Cylinder SAID32AX1000S
The AirTAC SAID32 Double Rod Cylinder SAID32AX1000S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 1000mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke1000 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32AX1000S
The AirTAC SAID32X1000-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and a 1000mm made-to-order stroke. Because a stainless SUS420J2 rod exits both end covers, the annulus area is identical on both sides. This yields equal push and pull forces, delivering 483N of thrust in each direction at 0.7 MPa.
Equipped with a magnet for position sensing, the extruded aluminum barrel integrates sensor grooves on both sides for CMSE reed and DMSE electronic switches. The rear rod extension is ideal for mounting a second mechanism, a position flag, or a cam, while providing superior anti-rotation guidance compared to a single-rod SAI.
Airtac SAID32 Double Rod Cylinder SAID32AX1000S Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX1000S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX1000S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32AX1000S Is Used
Symmetric Force Transfer
Drives a workpiece back and forth with identical 483N force and speed in both directions, ensuring perfectly balanced synchronous movement for delicate material handling.
Anti-Rotation Slides
The twin SUS420J2 rods exiting both end covers provide high torsional rigidity, preventing the load from rotating during long 1000mm traverse cycles.
Rear-Rod Sensing & Actuation
The protruding rear rod mounts a secondary cam or DMSE position flag, allowing operators to trigger downstream pneumatic logic independently of the primary front tool.
Is the Airtac SAID32 Double Rod Cylinder SAID32AX1000S the Right Cylinder?
Select this 32mm bore model when an application requires balanced 483N force both ways at 0.7 MPa. If you need less thrust, dropping to a smaller bore is not an option in the SAID series, but stepping up to a 40mm bore yields 739N both ways. This double-rod configuration is chosen over a single-rod SAI when dual-side guidance, anti-rotation, or rear-rod actuation is required. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, CR).
This cylinder uses PT tapered ports and includes a -S magnet for CMSE/DMSE sensors. Note that the 1000mm stroke exceeds the standard 500mm maximum for this bore, making it a non-standard made-to-order item. Furthermore, a 1000mm stroke creates significant rod-bearing bending moments under side loads; an external guide is mandatory to prevent premature seal wear. The variable air cushions at both ends decelerate the piston near stroke end but do not lock or hold the load when air is exhausted—use a SAIL or BSAID for position holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32AX1000S FAQ
Because the double-rod design subtracts the rod area from both sides of the piston, the extend and retract forces are equal. It provides 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa in both directions.
Yes, the SAID32X1000-S is dimensionally interchangeable per ISO 15552 mounting interface dimensions. It serves as a direct replacement for other ISO 15552 profile double-rod cylinders, utilizing PT tapered G1/8 ports and a standard mounting set.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX1000S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.