Airtac SAID32 Double Rod Cylinder SAID32X10S
The AirTAC SAID32 Double Rod Cylinder SAID32X10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 10mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke10 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X10S
The AirTAC SAID32X10-S is a double-acting, double-rod ISO 15552 profile cylinder. Because a carbon steel rod exits both end covers, the annulus area is identical on extend and retract, yielding exactly 345 N of force each way at 0.5 MPa. The -S suffix denotes an integrated magnet for position sensing.
This compact 10 mm stroke unit uses G1/8 PT ports and features adjustable air cushions at both ends. The rear rod end provides dual-side guidance to prevent rotation and can mount a secondary cam or position flag for twin-station actuation.
Airtac SAID32 Double Rod Cylinder SAID32X10S Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X10S Is Used
Symmetric Force Transfer
Ideal for short-stroke parts ejection where the 345 N force must remain identical in both directions to maintain cycle timing.
Anti-Rotation Slides
The twin-rod geometry prevents piston rotation during the 10 mm travel, ensuring precise vertical clamping without external guides.
Rear-Rod Sensing
Mount a DMSE electronic sensor flag on the rear rod end to confirm stroke completion without interfering with the primary work tool.
Is the Airtac SAID32 Double Rod Cylinder SAID32X10S the Right Cylinder?
Select this 32 mm bore when an application requires equal push and pull forces in a very short 10 mm stroke. If you need less force, stepping down is not an option as 32 mm is the smallest SAI/SAID bore; stepping up to a 40 mm bore raises the both-way force to 528 N at 0.5 MPa. Choose the double-rod SAID over a single-rod SAI when you need anti-rotation stability or rear-rod sensing.
This model includes the -S magnet for use with AirTAC CMSE reed and DMSE electronic sensors. It is dimensionally interchangeable per ISO 15552. Note that the air cushion decelerates the piston but does not hold the load; if air pressure is lost, the cylinder drifts, requiring a SAIL lock or external check valve for position holding. The available mounting set is Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X10S FAQ
Because it is a double-rod cylinder, the force is equal in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa.
Yes, the SAID32X10-S is dimensionally interchangeable with other ISO 15552 profile cylinders. It uses a reduced mounting accessory set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.