Airtac SAID32 Double Rod Cylinder SAID32X130
The AirTAC SAID32 Double Rod Cylinder SAID32X130 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 130mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke130 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X130
The AirTAC SAID32X130 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 130mm stroke. Because a carbon steel rod exits both end covers, the annulus area is identical on extend and retract, yielding equal force and speed in both directions. This design outputs 345N each way at 0.5 MPa, preventing the speed disparities common to single-rod units.
The twin-rod architecture allows you to mount a workpiece on the front rod end and a position flag or cam on the rear. It uses a PT G1/8 port and includes adjustable air cushions at both ends to decelerate the piston smoothly. The extruded aluminum barrel features sensor grooves on both sides for flexible switch placement.
Airtac SAID32 Double Rod Cylinder SAID32X130 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X130 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X130
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X130 Is Used
Symmetric Force Transfer
Drives loads requiring identical push and pull dynamics, using the equal 345N both-way output to prevent mechanical binding in transfer shuttles.
Anti-Rotation Slides
The twin-rod design resists torsional twisting better than a single rod, keeping guided slides perfectly aligned during 130mm travel.
Rear-Cam Actuation
Uses the protruding rear rod end to trip a mechanical limit switch or drive a secondary mechanism while the front rod handles the primary workload.
Is the Airtac SAID32 Double Rod Cylinder SAID32X130 the Right Cylinder?
Choose this 32mm bore when an application requires symmetric 345N force at 0.5 MPa and dual-side guidance. If your project needs less force, a smaller option is unavailable in this series, but stepping up to a 40mm bore provides 528N. The double rod is selected over a single-rod SAI when you need anti-rotation stability or rear-rod sensing. Since this is a 130mm stroke, it falls under standard lengths and does not require external side-load guidance.
This model uses a PT tapered port thread and lacks the -S magnet option, meaning it cannot host CMSE or DMSE sensors. It is dimensionally interchangeable per ISO 15552. Note that a plain SAID does not hold its position if air pressure is lost; for locking requirements, consider the SAIL or BSAID series. Available mountings include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X130 FAQ
Because it is a double-rod cylinder, the force is equal in both directions. It provides 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa for both extending and retracting.
Yes, it is a true ISO 15552 profile cylinder, making it dimensionally interchangeable with other ISO 15552 double-rod cylinders. Just ensure your mounting accessory falls within the SAID supported set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X130
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.