Airtac SAID32 Double Rod Cylinder SAID32X130S
The AirTAC SAID32 Double Rod Cylinder SAID32X130S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 130mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke130 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X130S
The AirTAC SAID32X130-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 130mm stroke. Because a carbon steel rod exits both end covers, the effective piston area is identical on extend and retract, yielding exactly 483N of force in each direction at 0.7MPa. The included magnet (-S) enables position detection along the dual sensor grooves using CMSE reed or DMSE electronic switches.
This through-rod architecture provides superior anti-rotation guidance compared to a single-rod SAI. You can mount the primary workpiece on the front rod end and attach a mechanical cam or limit flag to the rear protrusion to trigger external logic without interfering with the main payload.
Airtac SAID32 Double Rod Cylinder SAID32X130S Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X130S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X130S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X130S Is Used
Symmetric Transfer
Drives a pick-and-place shuttle where equal push and pull speeds are required to maintain precise cycle timing without recalibrating flow controls.
Dual-Station Actuation
Simultaneously operates two separate mechanisms from one piston, using the front rod to clamp and the rear rod to trigger a pneumatic valve.
Anti-Rotation Slide
Guides a light-duty linear slide where the twin rods prevent the payload from twisting under offset loads during vertical lifting.
Is the Airtac SAID32 Double Rod Cylinder SAID32X130S the Right Cylinder?
Select this 32mm bore when an application demands symmetric force and speed in both directions, offering 345N each way at 0.5MPa. If your mechanism requires less push/pull force, stepping down is not an option in the SAID range, but stepping up to a 40mm bore provides 528N both ways. Choose the SAID32X130-S specifically when you need dual-side actuation or rear-rod sensing within a compact ISO 15552 footprint.
This model uses a PT tapered port thread (G1/8) and supports mountings Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that the adjustable air cushions at both ends only decelerate the piston near stroke end; they do not hold the load. If air pressure is lost, the cylinder will drift, requiring an external pilot-operated check valve or a SAIL lock cylinder for position holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X130S FAQ
Because the rod occupies both sides of the piston, the effective area is equal in both directions. It provides 345N at 0.5MPa, 483N at 0.7MPa, and 621N at 0.9MPa for both extension and retraction.
Yes, the SAID32X130-S is dimensionally interchangeable per ISO 15552. It shares the standard 32mm mounting interface and uses the same Basic, FA, LB, and TC accessory footprints, though it omits FB, CA, CB, and CR mounts.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X130S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.