Airtac SAID32 Double Rod Cylinder SAID32X165
The AirTAC SAID32 Double Rod Cylinder SAID32X165 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke165 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X165
The AirTAC SAID32X165 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 165mm stroke. Because a rod extends from both end covers, the annulus area is identical on each side, yielding exactly 345N of force in both extend and retract directions at 0.5 MPa. This symmetric output is essential for applications requiring consistent push and pull dynamics.
The rear rod protrusion allows engineers to mount a position flag or secondary cam while driving the primary load on the front side. It uses a standard carbon steel rod and PT tapered port threads. Note that this twin-rod configuration requires extra rear clearance compared to a single-rod SAI cylinder.
Airtac SAID32 Double Rod Cylinder SAID32X165 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X165 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X165
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X165 Is Used
Symmetric Transfer
Drives a transfer arm with identical 345N force extending and retracting, ensuring smooth, balanced pacing for lightweight component shuttling.
Rear-Flag Sensing
Utilizes the rear rod extension to mount a cam for external position confirmation, keeping the primary front rod dedicated to the workpiece.
Anti-Rotation Slide
Leverages the twin-rod geometry to guide a vertical slide, preventing unwanted rotational drift during vertical clamping tasks.
Is the Airtac SAID32 Double Rod Cylinder SAID32X165 the Right Cylinder?
Select this 32mm bore when an application demands equal 345N thrust both ways alongside dual-side guidance. If your project requires less force, stepping down is not an option in this series, but stepping up to a 40mm bore provides 528N both ways. The double-rod design inherently resists rotation better than a single rod, though for this 165mm stroke, external guidance remains recommended for heavy off-center loads.
This model is dimensionally interchangeable per ISO 15552, making it a direct replacement for other ISO 15552 double-rod cylinders. It features a PT G1/8 port and supports mountings Basic, FA, LB, TC, FTC, TCM1, and TCM2. Remember that a plain SAID does not hold position without air pressure; for locking needs, consider the SAIL or BSAID variants.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X165 FAQ
The SAID32X165 provides equal force in both directions due to its double-rod design. It outputs 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa for both extend and retract strokes.
Yes, it is dimensionally interchangeable per ISO 15552. It supports a specific subset of mounts: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It does not use the FB, CA, CB, or CR mounts found on single-rod variants.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X165
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.