Airtac SAID32 Double Rod Cylinder SAID32X180
The AirTAC SAID32 Double Rod Cylinder SAID32X180 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 180mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke180 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X180
The AirTAC SAID32X180 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 180mm stroke. A single piston drives a carbon steel rod out of both end covers, yielding perfectly symmetric dynamics. It generates 345N of thrust and pull force alike at 0.5 MPa, ensuring equal speed and power in both travel directions.
This through-rod architecture allows you to mount the primary workpiece on one end while attaching a position flag or cam to the rear extension for dual-side sensing. The extruded aluminum barrel includes sensor grooves on both sides, and because no -S magnet is specified here, you can easily upgrade later using AirTAC CMSE reed or DMSE solid-state switches.
Airtac SAID32 Double Rod Cylinder SAID32X180 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X180 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X180
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X180 Is Used
Symmetric Force Transfer
Ideal for push-and-pull stations requiring identical 345N output and matching cycle speeds in both directions without recalculating annular area differences.
Anti-Rotation Slides
The twin carbon steel rods exiting both covers prevent piston rotation, providing precise linear guidance for delicate pick-and-place tooling.
Dual-Side Actuation
Drive a primary clamp on the front rod while utilizing the rear protrusion to mechanically trip a remote limit valve or mount a secondary cam.
Is the Airtac SAID32 Double Rod Cylinder SAID32X180 the Right Cylinder?
Choose this 32mm bore when you need compact, equal 345N bi-directional force at 0.5 MPa. If your application requires less than 345N, stepping down to a smaller bore is ideal, while heavier loads demand stepping up to the 40mm bore which provides 528N each way. The twin-rod design is specifically selected over a single-rod SAI when your mechanism requires superior anti-rotation guidance or needs to drive a secondary component from the rear of the cylinder.
This cylinder uses a PT tapered port thread and G1/8 air supply. Mounting options include the SAID-specific set of Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets (omitting the FB, CA, CB, and CR styles found on single-rod variants). Because the stroke is 180mm, side-load risks are moderate, but always verify rod-bearing loads. Note that the adjustable air cushions at both ends only decelerate the piston near stroke end; they do not hold the load. If your system loses air pressure, the piston will drift, so integrate an external rod lock or a SAIL/BSAID locking cylinder for position holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X180 FAQ
Because the rod occupies both sides of the piston, the effective area is identical in both directions. It provides 345N of force at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa on both the extend and retract strokes.
Yes. The SAID32X180 is a true ISO 15552 profile cylinder, making it dimensionally interchangeable with other ISO 15552 double-rod cylinders. It utilizes the standard SAID mounting interface set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and PT G1/8 ports.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X180
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.