Airtac SAID32 Double Rod Cylinder SAID32X195
The AirTAC SAID32 Double Rod Cylinder SAID32X195 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 195mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke195 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X195
The AirTAC SAID32X195 is a double-acting, double-rod ISO 15552 profile cylinder. A single piston drives a carbon steel rod out of both end covers, yielding perfectly symmetric dynamics. Because the annulus area is identical on both sides, it generates 483N of force in both extend and retract directions at 0.7 MPa.
This through-rod design lets you mount the primary workpiece on the front end while utilizing the rear protrusion for a cam, position flag, or secondary mechanism. The extruded aluminum barrel features sensor grooves on both sides. Without a magnet, it relies on external limit flags, but adding an -S magnet enables AirTAC CMSE reed and DMSE solid-state switches.
Airtac SAID32 Double Rod Cylinder SAID32X195 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X195 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X195
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X195 Is Used
Symmetric Transfer
Drives parts across a conveyor with identical force and speed in both directions, ensuring stable cyclic performance without momentum imbalances.
Anti-Rotation Slide
The twin-rod layout keeps the load guided and prevents unwanted rotation during vertical or horizontal sliding movements.
Rear-Cam Actuation
Mounts the primary tool on the front rod while using the rear protrusion to trigger a mechanical limit switch or secondary mechanism.
Is the Airtac SAID32 Double Rod Cylinder SAID32X195 the Right Cylinder?
Choose the SAID32X195 when an application demands equal push and pull forces alongside dual-side guidance to prevent rotation. If your mechanism requires less force, stepping down is not an option in this series, but stepping up to a bore 40 yields 528N both ways at 0.5 MPa. Unlike a single-rod SAI, this twin-rod configuration provides superior anti-rotation stability for sliding loads.
Remember that the adjustable air cushions at both ends only decelerate the piston near stroke end; they do not hold a load. If your system loses air pressure, the cylinder will drift. For position holding, consider an external pilot-operated check valve or a related SAIL lock cylinder. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 double-rod cylinders. Specify the PT port thread and mounting from the SAID subset: Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X195 FAQ
Because the rod occupies both sides of the piston, the effective area is equal in both directions. It provides 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa for both extending and retracting.
Yes, it is dimensionally interchangeable per ISO 15552 standards. However, the SAID series uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets found on single-rod variants.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X195
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.