Airtac SAID32 Double Rod Cylinder SAID32X210S
The AirTAC SAID32 Double Rod Cylinder SAID32X210S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 210mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke210 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X210S
The AirTAC SAID32X210-S is a double-acting, double-rod pneumatic cylinder built on the ISO 15552 profile standard. Because a rod exits both ends, the annulus area is identical on extend and retract, yielding an equal 483 N of force in both directions at 0.7 MPa. This specific unit includes a magnet (-S) for position sensing and uses a standard carbon steel rod.
Choosing this through-rod layout allows you to mount the primary workpiece on one end while utilizing the rear rod end for a cam, a position flag, or a secondary mechanism. The extruded aluminum barrel features sensor grooves on both sides, and the integrated magnet works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches.
Airtac SAID32 Double Rod Cylinder SAID32X210S Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X210S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X210S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X210S Is Used
Symmetric Force Transfer
Ideal for pushing and pulling loads that require identical 483 N force and speed in both directions, ensuring smooth symmetric motion without pressure compensation.
Anti-Rotation Slides
The twin-rod design naturally resists torsional twist, keeping guided slides perfectly aligned during precision handling tasks.
Through-Rod Sensing
Mount the primary tool on the front rod and attach a CMSE or DMSE sensor flag to the rear rod end to track cycle completion from the back of the machine.
Is the Airtac SAID32 Double Rod Cylinder SAID32X210S the Right Cylinder?
Step down to a smaller bore if your application requires less than 345 N at 0.5 MPa, or step up to the 40mm bore (528 N at 0.5 MPa) if you need higher thrust. You would select this double-rod SAID over a single-rod SAI when you need dual-side guidance, anti-rotation control, or rear-rod sensing capabilities. Ensure you order with the -S magnet option if you need to track piston position.
This 32mm bore uses a G1/8 port and PT tapered threads. The 210mm stroke is within the standard maximum of 1000mm, but at this length you should consider the rod-bearing bending loads and use an external guide to prevent side-load damage. Remember that the adjustable air cushions only decelerate the piston near stroke end; they do not hold the load if air pressure is lost. For position holding, consider an external rod lock or a SAIL cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X210S FAQ
Because the rod occupies both sides of the piston, the effective area is the same in both directions. It delivers an equal push and pull force of 483 N at 0.7 MPa (or 345 N at 0.5 MPa).
Yes, the SAID32X210-S is dimensionally interchangeable per ISO 15552. It shares the standard mounting interface and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets, though it omits FB, CA, CB, and CR mounts.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X210S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.