Airtac SAID32 Double Rod Cylinder SAID32X230S
The AirTAC SAID32 Double Rod Cylinder SAID32X230S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 230mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke230 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X230S
The AirTAC SAID32X230-S is a double-acting, double-rod ISO 15552 profile cylinder. A single piston drives a rod out of both end covers, yielding identical extend and retract forces of 483 N at 0.7 MPa. This through-rod geometry is ideal when you need to attach a workpiece on the front and a position flag or cam on the rear.
Equipped with a magnet for position sensing, this variant supports AirTAC CMSE reed and DMSE solid-state switches in the dual side barrel grooves. The carbon steel rod and PT tapered port threads provide robust service for general pneumatic automation.
Airtac SAID32 Double Rod Cylinder SAID32X230S Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X230S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X230S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X230S Is Used
Symmetric Force Transfer
Push and pull identical loads at the same speed using the equal annulus area, ensuring perfectly synchronized motion without separate flow controls.
Anti-Rotation Slides
Leverage the twin-rod guidance to prevent mechanical rotation of the payload, keeping precision slides and grippers perfectly aligned throughout the 230mm stroke.
Through-Rod Sensing
Mount the primary tool on the front rod and a CMSE/DMSE sensor flag on the rear protrusion to monitor end-of-stroke position from the opposite side of the machine frame.
Is the Airtac SAID32 Double Rod Cylinder SAID32X230S the Right Cylinder?
Select this 32mm bore when an application demands equal push and pull velocity, as the symmetrical annulus area ensures the 483 N force is identical in both directions. If your mechanism requires higher thrust, stepping up to the 40mm bore offers 739 N at 0.5 MPa, but the SAID32X230-S remains optimal for compact, symmetrically loaded transfer tasks. Because the 230mm stroke is substantial for a 32mm bore, the unsupported rod length increases the risk of rod-bearing bending under side loads; always use an external guide to prevent premature wear.
Unlike a single-rod SAI, the twin-rod design inherently resists mechanical rotation, making it a direct ISO 15552 replacement for other double-rod cylinders. Remember that the adjustable air cushions only decelerate the piston near stroke end; they do not hold a load. If air pressure is lost, the piston drifts, so add an external rod lock for fail-safe holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X230S FAQ
Because the rod occupies both sides of the piston, the effective area is identical in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extend and retract strokes.
Yes, it is dimensionally interchangeable per ISO 15552. However, SAID uses a reduced mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It omits the FB, CA, CB, and CR styles found on single-rod variants.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X230S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.