Airtac SAID32 Double Rod Cylinder SAID32X700S
The AirTAC SAID32 Double Rod Cylinder SAID32X700S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke700 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X700S
The AirTAC SAID32X700-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32 mm bore and 700 mm stroke. Because a rod extends from both end covers, the annulus area is identical on both sides, yielding exactly 483 N of force in both extend and retract directions at 0.7 MPa. The integrated -S magnet enables position sensing using CMSE reed or DMSE solid-state switches.
The through-rod design allows mounting a primary workpiece on the front and a secondary cam, position flag, or guidance mechanism on the rear rod. This twin-side actuation provides superior anti-rotation resistance compared to a single-rod SAI. Standard carbon steel rods and PT tapered port threads are equipped for robust industrial operation.
Airtac SAID32 Double Rod Cylinder SAID32X700S Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X700S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X700S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X700S Is Used
Symmetric-Force Transfer
Drives a transfer shuttle where the push and pull strokes carry identical loads, utilizing the 483 N both-way force to maintain consistent cycle times without pressure compensation.
Anti-Rotation Slides
Powers a linear slide mechanism using the twin-rod architecture to resist torsional deflection and keep the workpiece perfectly guided over the 700 mm travel.
Through-Rod Sensing
Actuates a primary gripper on the front rod while using the rear rod extension to trigger a DMSE solid-state sensor flag for precise end-of-stroke confirmation.
Is the Airtac SAID32 Double Rod Cylinder SAID32X700S the Right Cylinder?
Select this 32 mm bore when an application requires symmetric force and speed both ways, stepping down from a 40 mm bore (528 N at 0.5 MPa) if the lower 345 N both-way capacity at 0.5 MPa is sufficient. The double-rod architecture is chosen over a single-rod SAI when dual-side guidance, anti-rotation control, or rear-rod sensing is mandatory. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
At 700 mm, the stroke is standard for this bore but requires attention to side-load and rod-bearing bending; an external guide is recommended to prevent premature wear. Note that the variable air cushions at both ends only decelerate the piston near stroke end and do not hold a load. If position holding without live air pressure is required, use an SAIL lock cylinder, BSAID clamp-lock, or external rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X700S FAQ
The output force is equal in both directions due to the double-rod design. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extend and retract strokes.
Yes, the SAID32X700-S is dimensionally interchangeable per ISO 15552 and serves as a direct replacement for other ISO 15552 profile double-rod cylinders, sharing the same mounting interface and PT G1/8 port size.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X700S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.