Airtac SAID32 Double Rod Cylinder SAID32X80S
The AirTAC SAID32 Double Rod Cylinder SAID32X80S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke80 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X80S
The AirTAC SAID32X80-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 80mm stroke. Because the piston rod exits both end covers, the annulus area is identical on extend and retract, yielding an equal 345N of force in both directions at 0.5 MPa. The included magnet (-S) enables position detection along the dual sensor grooves.
This through-rod architecture allows you to mount the primary workpiece on the front thread (M10x1.25) and a cam or limit flag on the rear. The standard carbon steel rod provides robust dual-side guidance, while the adjustable air cushions at both ends absorb kinetic energy to prevent endcap impact.
Airtac SAID32 Double Rod Cylinder SAID32X80S Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X80S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X80S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X80S Is Used
Twin-Station Actuation
Drive two separate mechanisms simultaneously from one cylinder, utilizing the equal 345N force and speed on both the front and rear rod ends.
Anti-Rotation Slides
The through-rod design provides superior dual-side guidance, preventing piston rotation and maintaining precise alignment for sliding workpieces.
Rear-End Sensing
Mount a cam or target on the rear rod extension to trigger external sensors, keeping the primary work area clear of obstructions.
Is the Airtac SAID32 Double Rod Cylinder SAID32X80S the Right Cylinder?
Select this 32mm bore when an application demands equal push and pull forces (345N at 0.5 MPa) or requires anti-rotation guidance that a single-rod SAI cannot provide. If your mechanism needs less force, stepping down is not an option as 32mm is the smallest standard size; stepping up to a 40mm bore raises the both-way output to 528N at 0.5 MPa. Choose the double-rod configuration specifically to drive twin stations or to mount rear-facing sensors.
As a dimensionally interchangeable ISO 15552 component, it replaces equivalent profile cylinders using a PT G1/8 port and mounting accessories from the SAID subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the adjustable air cushion only decelerates the piston; it does not hold a load. If air pressure is lost, the cylinder drifts, so add an external rod lock or choose a BSAID clamp-lock for fail-safe holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X80S FAQ
The SAID32X80-S provides equal force in both extend and retract directions due to its double-rod design. It delivers 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa.
Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders. It supports a specific mounting subset including Basic, FA, LB, TC, FTC, TCM1, and TCM2, but omits FB, CA, CB, and CR.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.