Airtac SAIF Series Standard Cylinder with Valve SAIF32X80-06B
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X80-06B is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 80mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke80 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X80-06B
The AirTAC SAIF32X80-06B is a double-acting profile cylinder with a built-in 4M210-06 5/2 solenoid valve, delivering a Cv of 0.78 and an effective orifice of 14.0 mm2. Driven by a DC24V terminal coil drawing 3.0 W, it responds in 0.05 seconds or less. While the bare cylinder rates to 1.0 MPa, the integrated valve limits the practical operating range to 0.15-0.8 MPa, yielding a push force of 402 Newtons at 0.5 MPa.
By default, the piston rod retracts when the coil is energised, but you can reconfigure it to extend-when-energised by repositioning the valve. This self-contained assembly uses an O8 x O5 PU tube to bridge the manifold block, meaning the 1/8 inch cylinder port and the 1/8 inch valve port remain distinct. It eliminates remote plumbing, saving panel space for decentralized stations.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X80-06B Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X80-06B |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X80-06B
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×80 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X80-06B Is Used
Decentralized Stations
Ideal for large machines with decentralized stations, eliminating long tubing runs by switching locally via the built-in valve.
Compact Assembly Machines
Saves valuable panel and footprint space in tight machinery by integrating the 5/2 valve directly onto the cylinder profile.
Retrofit Automation
Perfect for retrofits where running new valve tubing is costly, requiring only a single DC24V electrical signal to actuate.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X80-06B the Right Choice?
Choose this 32mm bore if your application requires around 402 Newtons of push force at 0.5 MPa; stepping up to the 40mm bore raises that to 628 Newtons. The SAIF32X80-06B is ideal when a separate cylinder and remote valve would clutter your machine, as one DC24V signal drives the entire assembly. Remember that the 5/2 valve routes air and the end cushions only decelerate near stroke end—neither holds a load without live pressure. For true mechanical locking, consider the SAIL series instead.
When ordering a replacement, verify the 32mm bore, 80mm stroke, 1/8 inch valve port, DC24V voltage, terminal entry, and PT thread type. This standard configuration lacks a magnet, so position sensing via CMSE or DMSE switches is not supported without adding the -S option.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X80-06B FAQ
The built-in 4M210-06 valve has a Cv of 0.78 and an orifice of 14.0 mm2. The 32mm cylinder generates 402 Newtons of push force and 345 Newtons of pull force at 0.5 MPa.
The integrated 5/2 valve allows the cylinder to switch itself from one DC24V coil signal, removing the need for a separate remote valve. Factory-set to retract-when-energised, it can be reconfigured to extend-when-energised by repositioning the valve.
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X80-06B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.