Airtac SAI32 Standard Cylinder SAI32X80
The AirTAC SAI32 Standard Cylinder SAI32X80 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke80 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32X80
The AirTAC SAI32X80 is a double-acting ISO 15552 profile cylinder featuring a 32mm bore and 80mm stroke. It provides a push force of 402 N at 0.5 MPa, making it well-suited for compact, low-inertia handling tasks. The extruded aluminum barrel design omits tie rods, presenting a clean exterior that drops right into standardized ISO 15552 mounting interfaces.
For environments requiring higher heat resistance, the standard TPU seals can be swapped for Viton (H) or NBR (N). The piston rod comes equipped with a carbon steel construction as standard, and the fluid port utilizes a PT tapered thread type to ensure a reliable, leak-free pneumatic connection.
Airtac SAI32 Standard Cylinder SAI32X80 Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32X80 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32X80
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32X80 Is Used
Small Parts Handling
Ideal for driving compact grippers and lifting light electronic components on high-speed assembly lines.
Package Diverting
Provides the necessary 402N force to push small cartons or lightweight products onto secondary conveyor belts.
Pick-and-Place
Excellent for short-stroke vertical pick-and-place operations where a standardized ISO 15552 mounting footprint is required.
Is the Airtac SAI32 Standard Cylinder SAI32X80 the Right Cylinder?
Choose this 32mm bore when your application demands precise movement within a smaller force band; if you need roughly 220 N more push at 0.5 MPa, step up to the 40mm bore variant. Because this is a double-acting cylinder, it relies on continuous air pressure to hold position—if air is lost or exhausted, the rod will drift. Do not use the integrated air cushions as end-of-stroke locks or brakes; they only serve to decelerate the piston. For direct compatibility, match the 32mm bore, 80mm stroke, PT G1/8 port, and appropriate mounting accessories like an FA flange or LB foot. Note that a magnet (-S) is not specified for this configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32X80 FAQ
At 0.5 MPa, this 32mm bore double-acting cylinder generates a push force of 402 N and a pull force of 345 N.
Yes, the SAI32X80 is dimensionally interchangeable per ISO 15552. You can drop it in to replace other ISO 15552 profile cylinders without modifying the mounting interface.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32X80
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.