Airtac SAIJ100 Adjustable Cylinder SAIJ100AX100-10S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX100-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 100mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke100 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX100-10S
The AirTAC SAIJ100X100-10-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. The built-in rear stopper allows you to trim the effective travel, creating a precise 90-100mm usable stroke window for exact end-position tuning during commissioning.
This model includes a SUS420J2 stainless steel rod (option A) for enhanced corrosion resistance and carries an -S magnet for use with CMSE reed and DMSE electronic sensors. The rear adjuster acts strictly as a travel stop to set deceleration, not a lock; it will not hold a load without live air. For load-holding, consider an external rod lock or the SAIL series.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX100-10S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX100-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX100-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX100-10S Is Used
End-Position Tuning
Dial in the exact 90-100mm travel window during commissioning to perfect pressing or clamping depth without swapping cylinders.
Product Changeover
Quickly adjust the rear stopper to accommodate slightly different product sizes on the same line, minimizing downtime.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX100-10S the Right Cylinder?
An adjustable stroke is preferred over a fixed SAI cylinder when you need to fine-tune the end-of-travel position during machine setup or product changeover without adding external stops. To match this ISO 15552 replacement, specify: 100mm bore, 100mm stroke, 10mm adjustment, PT G1/2 port, SUS420J2 rod, and a magnet for CMSE/DMSE sensors.
Although the 100mm stroke is relatively short, the 25mm rod diameter handles side loads well, but any application approaching or exceeding 300mm of travel on larger bores would still require an external guide. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX100-10S FAQ
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster acts as a mechanical stop, allowing you to shorten the 100mm nominal stroke by up to 10mm. This creates a 90-100mm usable travel window for fine-tuning end positions without changing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX100-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.