Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-20
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX110-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 110mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke110 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-20
The AirTAC SAIJ100X110-20 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 110 mm nominal stroke by up to 20 mm. This yields a precise 90-110 mm usable travel window, enabling fine end-position tuning at commissioning without swapping out the physical cylinder or adding external stops.
This configuration features a SUS420J2 stainless steel rod (option A) for enhanced corrosion resistance and uses PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. While the rear screw acts as a travel stop to set deceleration, it does not hold the load without live air; for dead-load holding, consider the SAIL or BSAI series.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-20 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-20
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-20 Is Used
Machine Changeover
Dial in the 90-110 mm travel window during product size changes to set new extended positions without physically remounting the actuator.
End-Stop Calibration
Fine-tune the final extended position during commissioning using the rear adjuster, preventing hard mechanical crashes on heavy tooling.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-20 the Right Cylinder?
The adjustable stroke is ideal for machine setup where the exact extended position needs micro-tuning on the fly, unlike a fixed-stroke SAI cylinder.
Because the 110 mm stroke is relatively short, side-loading is less of a concern than with longer strokes, but the 25 mm rod and M20x1.5 thread still handle robust loads. To match this ISO 15552 interchangeable cylinder exactly, specify the 100 mm bore, 110 mm stroke, 20 mm adjustment, PT port, and the SUS420J2 rod material. Note that the mounting set is limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-20 FAQ
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke by up to 20 mm. This provides a usable travel window of 90 to 110 mm, allowing you to trim the end position without replacing the cylinder.
If higher pressure is used, the push force increases to 5497 N at 0.7 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.