Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-30S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX110-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 110mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke110 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-30S
The AirTAC SAIJ100X110-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel down to 80 mm from the 110 mm nominal stroke. The G1/2 PT tapered ports and integrated adjustable air cushions manage the kinetic energy of this heavy-duty actuator at cycle speeds up to 800 mm/s.
This adjustable-stroke design eliminates the need to swap cylinders or add external stops during machine commissioning or product changeover. The rear screw acts purely as a travel stop to set the retract end-position, meaning it does not hold the load without live air pressure. For load-holding requirements without continuous air, consider the SAIL or BSAI series, or use an external rod lock. The extruded aluminum barrel includes sensor grooves on both sides for precise tracking with CMSE reed or DMSE solid-state switches.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-30S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-30S Is Used
Machine Changeover
Quickly fine-tune the retract end-position within the 80-110 mm window when switching between product sizes on a packaging line, avoiding physical cylinder swaps.
End-Stop Calibration
Dial in exact retraction limits during initial machine commissioning, using the 30 mm adjustment range to compensate for mechanical tolerances in the fixture.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-30S the Right Cylinder?
The 30 mm adjustment window is perfect for dialing in exact end-of-stroke positions during setup. When specifying an ISO 15552 replacement, match the 100 mm bore, 110 mm stroke, 30 mm adjust, G1/2 PT ports, and the -S magnet requirement. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Because the stroke is 110 mm, side-load is minimal, but always guide the load externally if heavy lateral forces are present.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-30S FAQ
At the maximum 1.0 MPa pressure, the push force reaches 7068 N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke from 110 mm down to as little as 80 mm. This allows precise end-position tuning at commissioning, but it is only a stop and does not lock or hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.