Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-40
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX110-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 110mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke110 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-40
It features a SUS420J2 stainless steel rod (code A) for enhanced corrosion resistance and uses a PT tapered port thread. By integrating an external stopper at the rear, this model allows you to fine-tune the end position without swapping out the entire unit.
With a 110mm nominal stroke and a 40mm adjustment code, you gain a usable travel window of 70-110mm. This wide adjustment range is ideal for product changeovers on a packaging line, letting you dial in the exact retraction distance during commissioning. The extruded aluminum barrel includes sensor grooves on both sides, ready to accept CMSE or DMSE switches if a magnet is added later.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-40 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-40
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-40 Is Used
Product Changeovers
Quickly adapt machinery for varying package sizes by dialing the stroke back from 110mm to 70mm without changing the cylinder mounting.
End-Position Tuning
Fine-tune the retraction point during machine commissioning to achieve precise mechanical alignment without adding external stops.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-40 the Right Cylinder?
The SAIJ100X110-40 is selected over a fixed-stroke SAI when a machine requires variable end-stops or precise mechanical tuning at setup. Because the nominal stroke is under 300mm, side-load risks are moderate, but the 25mm rod diameter still handles lateral forces better than smaller bores. For exact ISO 15552 replacement matching, verify the 110mm stroke, 40mm adjuster, PT port, and required mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Remember that the rear adjuster functions strictly as a travel stop to set deceleration, not as a locking device. If your application requires the cylinder to hold a load without live air pressure, you must integrate an external pilot-operated check valve or switch to an AirTAC SAIL or BSAI series cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-40 FAQ
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster acts as a mechanical stop, allowing you to shorten the effective stroke by up to 40mm. This creates a usable travel window of 70-110mm from the 110mm nominal stroke, enabling precise end-position tuning during setup.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.