Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-40S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX110-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 110mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke110 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-40S
The AirTAC SAIJ100X110-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 110 mm travel to a precise usable window of 70-110 mm.
This model includes a magnet (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic solid-state sensors mounted in the dual-side extruded barrel grooves. The rear stopper acts purely as a travel end-position tuner for product changeovers, not a load-holding lock; for dead-air positioning, an external SAIL or BSAI locking cylinder is required.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-40S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-40S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-40S Is Used
Product Changeover Tuning
Quickly dial in the 70-110 mm stroke window during format changes on a packaging line, using the rear adjuster to set exact end positions for different carton sizes.
Automated End-Stopping
Use as an adjustable hard stop in automated assembly stations where the exact retraction point varies between product runs and needs on-the-fly calibration.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-40S the Right Cylinder?
Selecting this 100 mm bore over a smaller 80 mm variant gives you a significant thrust upgrade, stepping up from 2513 N to 3927 N at 0.5 MPa. The 40 mm adjustment range is ideal when a machine processes varying part sizes, letting you fine-tune the end stop during commissioning without adding external physical stops or swapping out the entire cylinder.
When matching your ISO 15552 interchangeable footprint, confirm the PT tapered port threads, the 110 mm nominal stroke, the 40 mm adjuster code, and the -S magnet requirement. Because the nominal stroke of 110 mm is relatively short for this bore, side-load stress is minimal, but always ensure the M20x1.5 rod thread is aligned to prevent binding during retraction.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-40S FAQ
At a higher 0.7 MPa, the push force increases to 5497 N.
The rear adjuster screw allows you to shorten the effective stroke by up to 40 mm. This creates a usable travel window of 70-110 mm from the nominal 110 mm stroke, enabling precise end-position tuning without changing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.