Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-50
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX110-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 110mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke110 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-50
It features a 25mm SUS420J2 stainless steel rod (material option A) and a PT tapered port thread. The -50 adjustment code allows you to dial back the 110mm nominal stroke by up to 50mm, creating a precise 60-110mm usable travel window for exact end-position tuning.
Because the rear adjuster acts purely as a mechanical stop, it will not hold a load without live air pressure; for true position holding, a SAIL or BSAI series cylinder is required. This model uses a reduced mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-50 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-50
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-50 Is Used
Machine Changeover
Dial in the 60-110mm travel window during product size transitions without swapping the cylinder or adding external stops.
Variable End-Stop Positioning
Fine-tune the retract position on a conveyor sorting line to accommodate different package dimensions on the fly.
Commissioning Stroke Tuning
Use the 50mm rear adjustment screw to precisely set the end-of-stroke position during initial machine setup and calibration.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-50 the Right Cylinder?
The SAIJ100X110-50 is selected over a fixed SAI cylinder when a variable end-stop is needed for product changeovers or commissioning fine-tuning. Ensure your setup matches the PT port thread, 50mm adjustment range, and ISO 15552 mounting interface. Since the nominal stroke is 110mm, a side-load guide is not strictly required, but the robust 25mm rod handles higher off-axis loads better than smaller bores.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-50 FAQ
At 0.9 MPa, the push force increases to 7068N.
The rear adjuster screw trims the 110mm nominal stroke by up to 50mm, giving an effective adjustable travel range of 60-110mm. The adjuster acts as a travel stop and does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.