Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-75
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX110-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 110mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke110 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-75
The AirTAC SAIJ100X110-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 110 mm stroke that can be dialed back by up to 75 mm, yielding a precise 35-110 mm usable travel window for on-the-fly end-position tuning.
This extruded aluminum profile cylinder includes variable air cushions at both ends to manage kinetic energy. The rear adjuster acts purely as a travel stop to fine-tune positioning during commissioning or product changeovers, meaning it does not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-75 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-75 Is Used
Machine Setup Calibration
Dial in the exact 35-110 mm travel distance during initial commissioning to perfectly align pressing or clamping forces without adding external stopper blocks.
Product Changeover
Quickly adjust the retract end-position by up to 75 mm when switching between different product sizes on the same production line.
Variable End Stops
Handle multiple part sizes in automated assembly by fine-tuning the stroke window on the fly, ensuring precise end-of-travel positioning.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-75 the Right Cylinder?
Choose this 100 mm bore when an application requires substantial thrust—3927 N at 0.5 MPa or 7068 N at 0.9 MPa. If your force requirements are lower, stepping down to an 80 mm bore yields 2513 N at 0.5 MPa, whereas moving up to a 125 mm bore provides 6136 N. The adjustable stroke is ideal for variable end stops and machine setups where the exact travel distance needs fine-tuning without swapping out a fixed-stroke SAI cylinder.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 110 mm stroke, 75 mm adjustment range, PT port threads, and the Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting footprints. Because this unit lacks a magnet (-S), it will not work with CMSE or DMSE sensors; if position feedback is needed, select a -S variant. While the 25 mm rod and M20x1.5 thread handle high side loads well, any stroke over 300 mm would require an external guide, though this 110 mm travel window remains well within safe limits.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-75 FAQ
At the maximum 1.0 MPa pressure, it delivers up to 801 kgf.
The rear adjusting screw allows you to shorten the effective stroke by up to 75 mm from the nominal 110 mm, creating a 35-110 mm usable travel window. The adjuster functions as a mechanical stop to fine-tune the end position and does not lock or hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX110-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.