Airtac SAIJ100 Adjustable Cylinder SAIJ100AX130-30
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX130-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 130mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke130 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX130-30
The AirTAC SAIJ100X130-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 100 to 130 mm, allowing you to dial back the nominal 130 mm stroke by up to 30 mm during commissioning.
This model uses a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance. The extruded aluminum barrel incorporates sensor grooves on both sides for flexible switch mounting. It features PT tapered ports (G1/2) and variable air cushions at both ends to decelerate heavy moving loads smoothly.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX130-30 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX130-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX130-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX130-30 Is Used
Machine Setup Tuning
Fine-tune the retract end-position within the 100-130 mm window during initial commissioning to perfect pressing or clamping depth without external shims.
Product Changeover
Quickly adapt the cylinder stroke for different product sizes on a packaging line by dialing the rear screw up to 30 mm.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX130-30 the Right Cylinder?
Choose this 100 mm bore when you need high thrust—3927 N at 0.5 MPa—without stepping up to the heavier 125 mm bore (6136 N). The 30 mm adjustment range is ideal for product changeovers, letting you set a new retract end-stop without adding external physical stops or swapping out the entire cylinder.
If your application requires the load to be held mechanically without live air pressure, note that the rear adjuster on this SAIJ acts only as a travel stop, not a brake. For fail-safe load holding, consider an AirTAC SAIL or BSAI cylinder. To match this ISO 15552 footprint exactly, specify the 100 mm bore, 130 mm stroke, 30 mm adjustment, PT port, and no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX130-30 FAQ
At 0.9 MPa, the push force increases to 7068 N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective stroke from 130 mm down to 100 mm. This provides a 30 mm tuning window for precise end-positioning without replacing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX130-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.