Airtac SAIJ100 Adjustable Cylinder SAIJ100AX15-10
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX15-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 15mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke15 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX15-10
The AirTAC SAIJ100X15-10 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, designed for applications requiring exact end-position tuning. It features a 100mm bore and a 15mm nominal stroke, paired with a 10mm adjustment range that creates a highly precise 5-15mm usable travel window.
This model is configured with an SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance and features PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, allowing for the direct mounting of AirTAC CMSE reed or DMSE electronic sensors if a magnet is added later. Adjustable air cushions at both ends ensure controlled deceleration even at the standard 30-800mm/s speed range.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX15-10 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX15-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX15-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX15-10 Is Used
Machine Commissioning Tuning
Allows engineers to fine-tune the end-of-stroke position during initial setup or product changeover, dialing back the 15mm stroke by up to 10mm directly via the rear adjuster screw.
Compact Assembly Pressing
Delivers high pressing force in a tight physical space, leveraging the 100mm bore and SUS420J2 stainless rod for reliable operation in industrial assembly lines.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX15-10 the Right Cylinder?
The 10mm adjustment range is specifically valuable for machine commissioning, allowing operators to dial in the exact 5-15mm travel limit without adding external stops. Because the stroke is only 15mm, side-load stress on the 25mm rod is minimized compared to longer strokes.
When replacing an ISO 15552 cylinder, verify the 100mm bore, 15mm stroke, PT port threads, and the required mounting hardware. SAIJ supports a specific mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that the rear adjuster acts only as a travel stop; it does not hold the load without live air. For dead-pilot load holding, consider an AirTAC SAIL or BSAI series cylinder instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX15-10 FAQ
At the maximum rated pressure of 1.0 MPa, it can deliver up to 801 kgf.
The rear adjuster screw allows you to shorten the 15mm nominal stroke by up to 10mm, creating a usable travel window of 5-15mm. This stopper sets the end position but does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX15-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.