Airtac SAIJ100 Adjustable Cylinder SAIJ100AX150-30
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX150-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 150mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke150 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX150-30
The AirTAC SAIJ100X150-30 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 120 to 150 mm. The extruded aluminum barrel features sensor grooves on both sides for flexible switch placement.
This configuration includes an SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance and uses PT tapered port threads with a G1/2 connection. The rear adjustment screw acts purely as a mechanical stop to fine-tune the retract position during commissioning; it does not lock the load without live air pressure.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX150-30 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX150-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX150-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX150-30 Is Used
Machine Setup Tuning
Dial in the exact retract distance within the 120-150 mm window during initial commissioning to perfectly align heavy tooling without machining external stoppers.
Product Changeover
Quickly adjust the end-stop position by up to 30 mm on a packaging line when switching to a different product size, minimizing downtime between runs.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX150-30 the Right Cylinder?
The 30 mm adjustment window is ideal for product changeovers, allowing you to shift the end position without swapping the cylinder or adding external stops. For load-holding without continuous air pressure, integrate an external rod lock or pilot-operated check valve, as the adjuster and air cushions only decelerate travel.
To match this ISO 15552 interchangeable cylinder, confirm the 150 mm stroke, 30 mm adjustment range, G1/2 PT port, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because this unit lacks the -S magnet option, it cannot host CMSE reed or DMSE electronic sensors without modification.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX150-30 FAQ
At the maximum 1.0 MPa pressure, it can deliver up to 801 kgf.
The rear adjuster screw allows you to shorten the effective stroke from the nominal 150 mm down to 120 mm. This mechanical stop fine-tunes the end position during setup but does not hold the load dynamically without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX150-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.