Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-20
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX165-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 165mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke165 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-20
The AirTAC SAIJ100X165-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 145-165 mm usable travel window, allowing you to dial back the 165 mm nominal stroke by up to 20 mm.
Equipped with a SUS420J2 stainless steel rod (option A) and PT tapered port threads, it offers excellent corrosion resistance. The extruded aluminum barrel includes sensor grooves on both sides. You can fit AirTAC CMSE reed or DMSE electronic sensors if position feedback is needed later. The rear adjuster acts purely as a travel stop to fine-tune end positions, not as a load-holding lock.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-20 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-20
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-20 Is Used
Machine Changeover
Dial in the 145-165 mm travel window during product size changes without physically swapping the actuator or adding external stopper blocks.
Assembly End-Stops
Fine-tune the retraction end position during commissioning to perfectly seat parts, using the rear screw rather than re-shimming the mount.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-20 the Right Cylinder?
The adjustable stroke is highly beneficial for product changeovers, letting you set variable end-stops on the fly without swapping cylinders or adding external stops. For load-holding without live air pressure, consider the SAIL or BSAI series instead, as the SAIJ adjuster is a stop, not a brake.
This model is dimensionally interchangeable per ISO 15552. To match this replacement, verify the 100 mm bore, 165 mm stroke, 20 mm adjustment range, PT port threads, and the standard mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). At 165 mm stroke, side loads are minimal, but always ensure the piston rod is properly guided to prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-20 FAQ
A rear external stopper screw lets you trim the effective stroke by up to 20 mm, creating a usable travel window of 145 to 165 mm. It sets the end position mechanically but does not lock the load without live air pressure.
At 0.7 MPa, the push force increases to 5497 N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.