Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-30
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX165-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 165mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke165 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-30
The AirTAC SAIJ100X165-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 135 to 165 mm, allowing you to dial back the nominal 165 mm stroke by up to 30 mm during commissioning.
This unit utilizes a SUS420J2 stainless steel rod (material code A) for superior corrosion resistance and features PT (tapered) G1/2 ports. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-30 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-30 Is Used
Product Changeovers
Dial in the 135-165 mm travel window on the fly to accommodate varying product lengths without physically swapping cylinders or reworking machine stops.
End-Position Tuning
Fine-tune the retract end position during machine commissioning using the rear adjuster, eliminating the need for custom spacer rings or external mechanical stops.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-30 the Right Cylinder?
The 30 mm adjustment range is ideal for product changeovers, letting you fine-tune the end position without adding external stops or swapping the cylinder.
Because the stroke is 165 mm, the 25 mm rod and M20x1.5 thread handle side loads well, though an external guide is recommended for heavy lateral forces. Remember that the rear adjuster is a travel stop, not a lock; the SAIJ does not hold loads without live air. For position holding, consider SAIL or BSAI cylinders. To replace an ISO 15552 unit, match the 100 mm bore, 165 mm stroke, 30 mm adjust, PT G1/2 port, and mounting footprint.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-30 FAQ
At the maximum 1.0 MPa pressure, it can deliver up to 801 kgf.
The rear external stopper screw allows you to shorten the effective travel from the 165 mm nominal stroke down to as little as 135 mm. This creates a 135-165 mm adjustable window for fine-tuning the end position at commissioning without changing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.