Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-50
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX165-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 165mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke165 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-50
The AirTAC SAIJ100X165-50 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 165 mm stroke that can be fine-tuned backward by up to 50 mm, yielding a usable travel window of 115 to 165 mm. This allows precise end-position calibration during commissioning without swapping out the physical actuator. The extruded aluminum barrel features dual sensor grooves, and this specific configuration utilizes a SUS420J2 stainless steel rod for enhanced corrosion resistance.
The PT tapered porting is G1/2, and the unit includes variable air cushions at both ends to manage kinetic energy. The rear stopper screw acts strictly as a travel limiter to set the retraction end-point; it is not a locking mechanism and will not hold a load without continuous live air pressure.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-50 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-50
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-50 Is Used
Product Changeovers
Dial in the 115-165 mm travel window during format size changes on a packaging line, using the rear screw to set new retraction endpoints rapidly.
Machine Setup
Fine-tune the end-of-stroke position during initial commissioning without machining external stopper blocks or changing the cylinder.
Variable End Stops
Accommodate multiple part sizes on a single fixture by adjusting the retraction depth up to 50 mm to suit different workpiece heights.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-50 the Right Cylinder?
The 50 mm adjustment range is ideal for production lines needing rapid product-size changeovers, replacing the need to bolt on external physical stops. For an exact ISO 15552 replacement match, verify the 165 mm stroke, 50 mm adjustment code, PT port threads, and your required mounting bracket from the available SAIJ set: Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Because the 165 mm stroke is relatively short for this bore size, side-load stress on the 25 mm rod is minimal, though external guiding remains best practice for heavy offset loads. If your process demands true load-holding without live air pressure, a standard SAIJ is insufficient; consider an AirTAC SAIL with an air-released lock or a BSAI clamp-lock cylinder instead. Note that this SKU is supplied without a magnet, so position sensing via CMSE or DMSE switches is not supported without a model change.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-50 FAQ
At the maximum 1.0 MPa pressure, it achieves 801 kgf.
The rear adjuster screw allows you to shorten the 165 mm nominal stroke by up to 50 mm, creating a usable travel window of 115 to 165 mm. This stopper only limits the travel end and does not lock the load without air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX165-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.