Airtac SAIJ100 Adjustable Cylinder SAIJ100AX175-40
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX175-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 175mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke175 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX175-40
The AirTAC SAIJ100X175-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel within a 135-175 mm window. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
This model uses a PT tapered G1/2 port and omits the FB, CA, CB, and CR mounting styles, offering a focused set of attachments (Basic, FA, LB, TC, FTC, TCM1, TCM2). The rear adjuster acts purely as a mechanical stop to set the retract end position during commissioning; it does not lock or hold the load without live air pressure.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX175-40 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX175-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX175-40
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX175-40 Is Used
Variable End-Stop Machining
Dial in the exact retract position for machining operations or part ejection without replacing the cylinder or adding external mechanical stops.
Product Changeover Diverter
Quickly adjust the travel window by up to 40 mm to accommodate different package sizes on a conveyor sorting line during product transitions.
Commissioning Stroke Tuning
Fine-tune the final end position during machine setup to clear mechanical interference or synchronize multiple actuators precisely.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX175-40 the Right Cylinder?
Choose this 100 mm bore when an 80 mm bore (providing 3518 N at 0.7 MPa) is insufficient for your load, but an 125 mm cylinder is oversized. The 40 mm adjustment range is ideal for product changeovers where the exact end-stop varies slightly, eliminating the need to physically swap cylinders or bolt on external stops. For load-holding without continuous air, select the SAIL or BSAI series instead, as the SAIJ adjuster is not a brake.
For ISO 15552 interchangeability, match the 100 mm bore, 175 mm nominal stroke, 40 mm adjustment, PT G1/2 port, and desired mounting. Because the stroke is under 300 mm, side-load stress is moderate, but the 25 mm rod diameter still handles lateral forces better than smaller bores.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX175-40 FAQ
At the maximum 1.0 MPa pressure, it can deliver up to 801 kgf.
The rear adjuster screw lets you shorten the effective travel from the nominal 175 mm down to 135 mm. It functions as a mechanical stop for end-position tuning and is not a lock; it cannot hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX175-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.