Airtac SAIJ100 Adjustable Cylinder SAIJ100AX175-40S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX175-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 175mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke175 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX175-40S
The AirTAC SAIJ100X175-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 175mm nominal stroke by up to 40mm. This creates a 135-175mm usable travel window, providing precise end-position tuning at commissioning without swapping the hardware or adding external stops. It delivers robust thrust, pushing 3927N and pulling 3681N at 0.5 MPa.
This SKU features a SUS420J2 stainless steel rod (option A) for enhanced corrosion resistance and includes a magnet for position sensing with AirTAC CMSE reed or DMSE electronic switches. The extruded aluminum barrel carries sensor grooves on both sides, and the G1/2 port handles the required air volume for this high-force size.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX175-40S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX175-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX175-40S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX175-40S Is Used
Product Size Changeover
Dial in the 135-175mm travel window during format resets on packaging lines to accommodate different carton sizes without changing cylinders.
End-Position Tuning
Fine-tune the retract stop during machine commissioning to hit exact positioning targets, avoiding the need for machined external spacers.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX175-40S the Right Cylinder?
The adjustable 135-175mm travel is ideal for product-size changeovers on a line, letting you fine-tune the retract stop on the fly instead of machining custom spacers. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
When replacing an ISO 15552 cylinder, match the 100mm bore, 175mm stroke, 40mm adjustment, PT port thread, and -S magnet. The rear adjuster acts only as a travel stop and the air cushions handle deceleration; neither holds the load without live air. For load-holding without continuous pressure, use an external rod lock, a pilot-operated check valve, or AirTAC SAIL and BSAI locking cylinders. With a 175mm stroke, ensure external guides support the load to prevent side-loading on the rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX175-40S FAQ
At 0.7 MPa, the push force increases to 5497N.
A rear screw stopper lets you trim the 175mm nominal stroke back by up to 40mm, creating a 135-175mm usable travel window. This adjuster sets the end position but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX175-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.