Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-10
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX200-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 200mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke200 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-10
The AirTAC SAIJ100X200-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 190-200 mm usable travel window by allowing you to dial back the nominal 200 mm stroke by up to 10 mm.
This configuration uses a SUS420J2 stainless steel rod (material code A) for superior corrosion resistance over standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE solid-state switches, though this specific SKU is supplied without a magnet. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-10 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-10 Is Used
Machine Setup Calibration
Dial in the exact 190-200 mm retract position during initial commissioning without swapping cylinders or adding external stopper blocks.
Product Changeover
Quickly adjust the end-stop by up to 10 mm on a packaging line when transitioning between slightly different product sizes.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-10 the Right Cylinder?
Choose this adjustable-stroke model over a fixed SAI cylinder when your application requires fine end-position tuning at commissioning or during product changeover, eliminating the need to bolt on external stops. With a 25 mm rod diameter and M20x1.5 rod thread, it handles substantial side loads, though any stroke of 300 mm or more would require an external guide. This SKU features PT tapered port threads and a G1/2 air supply port.
If your process requires true load-holding without continuous live air, note that the SAIJ adjuster is not a lock; consider the SAIL pneumatic lock or BSAI clamp-lock cylinder instead. This model is dimensionally interchangeable per ISO 15552 and supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-10 FAQ
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from 200 mm down to 190 mm. This provides a 190-200 mm adjustable window for fine-tuning the retract end position without changing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.