Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-10S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX200-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 200mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke200 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-10S
The AirTAC SAIJ100X200-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 190-200 mm for precise end-position tuning. The extruded aluminum barrel features sensor grooves on both sides, ready to accept CMSE reed or DMSE electronic solid-state switches.
This 100 mm bore model uses a G1/2 port and M20x1.5 rod thread, delivering robust performance within a 30-800 mm/s speed range. The rear adjuster acts purely as a mechanical stop to dial in the retract position without swapping components, but it does not lock the load without live air pressure.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-10S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-10S Is Used
Tooling Offset Calibration
Dial in the exact 190-200 mm retract position during machine setup, allowing operators to fine-tune tooling contact without machining custom spacer plates.
Product Changeover
Quickly adjust the end-stop by up to 10 mm when switching between product sizes on a high-thrust assembly line, minimizing downtime.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-10S the Right Cylinder?
The 10 mm adjustment window is ideal for fine-tuning tooling offsets during machine commissioning or product changeovers, avoiding the need to fabricate external stopper blocks. For applications requiring the cylinder to hold a load without continuous air pressure, note that this standard SAIJ adjuster is a stop and not a lock; consider an AirTAC SAIL or BSAI variant instead.
To match this exact ISO 15552 replacement, specify a 100 mm bore, 200 mm stroke, 10 mm adjustment range, PT tapered port thread, and the -S magnet option. Mounting choices include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since the 200 mm stroke is below the 300 mm threshold, side-load stress is manageable, but ensure the M20x1.5 rod thread is properly aligned to maximize seal life.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-10S FAQ
At 0.9 MPa, the push force increases to 7068 N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the nominal 200 mm stroke by up to 10 mm, creating a 190-200 mm travel window. It sets the end position but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.