Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-20
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX200-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 200mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke200 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-20
The AirTAC SAIJ100X200-20 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to fine-tune the effective travel window from 180 to 200 mm during commissioning.
This variant features a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance and utilizes PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic solid-state switches, giving you adaptable end-of-stroke detection without needing extra brackets.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-20 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-20
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-20 Is Used
Product Size Changeovers
Dial in the 180-200 mm travel window during line changeovers to accommodate different product lengths without physically replacing the actuator.
End-Position Tuning
Fine-tune the retract stopper during machine commissioning to dial in exact seating positions for high-precision heavy-duty assembly tasks.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-20 the Right Cylinder?
Choose this 100 mm bore adjustable-stroke model when your application requires precise in-field tuning of the retract end-position without swapping out the entire cylinder or adding bulky external stops. When matching ISO 15552 interchangeable replacements, verify the 200 mm stroke, 20 mm adjustment range, PT G1/2 port, and your required mounting set.
The SAIJ series supports a reduced mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options. Keep in mind that the rear adjuster acts purely as a travel stop to set deceleration and end-position; it does not hold the load without live air pressure. For true load-holding requirements without continuous air, consider an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-20 FAQ
If pressure is increased to 0.9 MPa, the push force reaches 7068 N.
The rear external screw acts as a mechanical stop that allows you to shorten the nominal 200 mm stroke by up to 20 mm, creating a usable travel window of 180 to 200 mm. It only sets the end-position and does not lock or hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX200-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.