Airtac SAIJ100 Adjustable Cylinder SAIJ100AX210-20
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX210-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 210mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke210 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX210-20
The AirTAC SAIJ100X210-20 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 210 mm nominal travel by up to 20 mm. This creates a precise 190-210 mm usable window, giving you the freedom to fine-tune end positions at commissioning without adding external stops. It delivers substantial thrust, pushing 5497 N at 0.7 MPa, making it well-suited for heavy-duty positioning tasks.
This SKU features a SUS420J2 stainless steel rod (option A) for improved corrosion resistance and carries a G1/2 PT tapered port. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. Remember that the rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX210-20 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX210-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX210-20
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX210-20 Is Used
Product Changeovers
Dial in the 190-210 mm travel window during format size changes on a packaging line, avoiding the need to physically swap out the entire cylinder.
Machine Setup
Fine-tune the retract end-position during initial commissioning to perfectly align tooling, saving time over machining custom external stop blocks.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX210-20 the Right Cylinder?
The adjustable stroke is ideal for product-size changeovers on a line, letting you shift the end-stop by up to 20 mm in place rather than swapping to a fixed-stroke SAI cylinder. Because the nominal stroke is 210 mm, an external guide is recommended to manage side loads on the 25 mm rod.
For a direct ISO 15552 replacement, match the 100 mm bore, 210 mm stroke, 20 mm adjustment, G1/2 PT port, and your required mounting choice from the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, or TCM2. If your application requires holding a load without continuous air pressure, this cylinder is not suitable; instead, look to the SAIL or BSAI locking variants.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX210-20 FAQ
At 0.5 MPa, the push force is 3927 N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 210 mm nominal stroke by up to 20 mm, resulting in a 190-210 mm usable travel window. It sets the end position but does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX210-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.