Airtac SAIJ100 Adjustable Cylinder SAIJ100AX220-10
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX220-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 220mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke220 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX220-10
The AirTAC SAIJ100X220-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides for straightforward position feedback.
Equipped with a SUS420J2 stainless steel rod (material code A) and PT tapered port threads, this model is built for durability. The rear adjustment screw acts purely as a travel stop to fine-tune the retract position during commissioning without requiring external stops. It is not a locking device, so live air pressure must be maintained to hold the load.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX220-10 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX220-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX220-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX220-10 Is Used
Machine Setup Calibration
Dial in the exact retract end-position within the 210-220mm window during initial commissioning without machining custom spacers.
Product Changeover
Quickly adjust the stroke by up to 10mm on packaging lines when switching to a slightly different product size.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX220-10 the Right Cylinder?
The integrated 10mm adjustment window replaces the need to swap out a fixed-stroke SAI cylinder for minor position variations. When matching ISO 15552 replacements, ensure you specify the 100mm bore, 220mm stroke, 10mm adjustment, PT port threads, and the SUS420J2 rod material.
Because the stroke is 220mm, you should account for potential side-loading on the 25mm rod; an external guide is recommended to prevent premature wear. If your application requires the cylinder to hold its position without continuous air pressure, this standard adjuster will not suffice—consider an AirTAC SAIL or BSAI locking cylinder instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX220-10 FAQ
The maximum thrust is 801 kgf at 1.0 MPa.
The rear adjuster screw lets you shorten the effective 220mm stroke by up to 10mm, creating a 210-220mm travel window. It functions as a mechanical stop for end-position tuning and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX220-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.