Airtac SAIJ100 Adjustable Cylinder SAIJ100AX280-75
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX280-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 280mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke280 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX280-75
The AirTAC SAIJ100X280-75 is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster. It provides a usable travel window of 205 to 280 mm by dialing the external stopper back up to 75 mm. The SUS420J2 stainless steel rod resists corrosion in humid washdown environments.
This model features a G1/2 port and adjustable air cushions at both ends to decelerate heavy loads. The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX280-75 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX280-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX280-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX280-75 Is Used
Machine Changeover
Quickly dial in the retract stop from 205 to 280 mm during product size transitions on a packaging line without changing the cylinder.
End-Position Tuning
Fine-tune the final end position during machine commissioning to ensure perfect alignment of heavy moving sub-assemblies.
Variable End Stops
Set precise retract distances for automated material handling equipment that requires flexible stroke limits per cycle.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX280-75 the Right Cylinder?
If you need less force, a 80 mm bore offers 2513 N. Choose the SAIJ adjustable type over a fixed SAI when you need to fine-tune the retract end position during commissioning or product changeover without swapping cylinders.
The rear adjuster acts as a travel stop, not a lock, and cannot hold a load without live air pressure. For load-holding without air, use an external rod lock or explore SAIL and BSAI cylinders. This SAIJ100X280-75 configuration features a PT tapered port, SUS420J2 stainless steel rod, and no magnet. Since the 280 mm stroke is substantial, ensure proper external guiding to prevent rod side-load damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX280-75 FAQ
The rear adjuster screw lets you shorten the nominal 280 mm stroke by up to 75 mm, creating a usable travel window of 205 to 280 mm. This allows you to set the exact retract end position without adding external stops.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX280-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.