Airtac SAIJ100 Adjustable Cylinder SAIJ100AX280-75S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX280-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 280mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke280 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX280-75S
The AirTAC SAIJ100X280-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows operators to dial in the retract end position during commissioning or product changeovers without swapping out the entire unit.
This SKU includes a magnet (-S) for use with AirTAC CMSE reed and DMSE electronic sensors, and features a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance. The extruded aluminum barrel incorporates sensor grooves on both sides, and the mounting interface strictly utilizes the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX280-75S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX280-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX280-75S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX280-75S Is Used
Variable End-Stop Positioning
Ideal for assembly lines where the retract distance must be frequently reconfigured for different product sizes, utilizing the 75mm adjustment range to modify the 280mm stroke on the fly.
Commissioning Fine-Tuning
Allows engineers to precisely dial in the 205-280mm travel window during machine setup without machining external stopper blocks or changing the cylinder.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX280-75S the Right Cylinder?
The adjustable rear stopper acts solely as a travel end deceleration device, not a lock, so the SAIJ cannot hold a load without live air. For load-holding requirements, consider an external rod lock or the AirTAC SAIL series.
Because the 280mm stroke exceeds 300mm when combined with side loads, ensure an external guide is used to prevent rod binding. To match this ISO 15552 interchangeable cylinder exactly, specify: 100mm bore, 280mm stroke, 75mm adjustment, PT tapered port threads, and the -S magnet option.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX280-75S FAQ
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster screw allows you to shorten the effective travel by up to 75mm. This creates a usable stroke window of 205-280mm, enabling fine-tuning of the end position without replacing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX280-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.