Airtac SAIJ100 Adjustable Cylinder SAIJ100AX290-75S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX290-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 290mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke290 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX290-75S
The AirTAC SAIJ100X290-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a SUS420J2 stainless steel rod and a PT tapered port thread. By turning the external adjusting screw at the rear, you can shorten the effective travel, creating a usable stroke window of 215-290 mm without changing the cylinder itself.
The extruded aluminum barrel includes sensor grooves on both sides. Fitted with a magnet, it supports AirTAC CMSE reed and DMSE electronic solid-state switches for exact end-position detection. The rear adjuster acts purely as a travel stop to fine-tune the end position during commissioning; it does not hold the load without live air. For load-holding without pressure, consider the SAIL or BSAI series.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX290-75S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX290-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX290-75S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX290-75S Is Used
Variable End-Position Tuning
Dial in the exact 215-290 mm travel distance during machine commissioning to perfectly seat parts without re-engineering the fixture.
Product Size Changeover
Quickly adapt a packaging or assembly line to different carton lengths by adjusting the rear stopper up to 75 mm in minutes.
Gentle End Damping
Leverage the 36 mm variable air cushion alongside the stopper to decelerate heavy 100 mm bore movements smoothly before the final position.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX290-75S the Right Cylinder?
Choose this adjustable-stroke model over a fixed SAI when you need variable end-stops for rapid product changeover or fine-tuning at machine setup, avoiding the need to bolt on external stops. To match this ISO 15552 interchangeable cylinder, specify the 100 mm bore, 290 mm stroke, 75 mm adjustment, PT port, and the -S magnet. Because the 290 mm stroke is relatively long, ensure the 25 mm rod and M20x1.5 thread are paired with an external guide to handle side loads. SAIJ uses a reduced mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX290-75S FAQ
The maximum rated force is 801 kgf at 1.0 MPa.
The rear adjuster screw acts as a mechanical stop, allowing you to trim the 290 mm nominal stroke back by up to 75 mm. This creates a usable travel window of 215 to 290 mm. The adjuster only sets the end position; it does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX290-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.