Airtac SAIJ100 Adjustable Cylinder SAIJ100AX30-20S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX30-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 30mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke30 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX30-20S
The AirTAC SAIJ100X30-20-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to fine-tune the end-of-travel position during commissioning. With a 30 mm nominal stroke and a 20 mm adjustment range, it provides a usable travel window of 10-30 mm.
This variant features a SUS420J2 stainless steel rod (code A) for enhanced corrosion resistance and uses PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated magnet (-S) supports AirTAC CMSE reed and DMSE electronic solid-state switches. The rear adjuster acts purely as a mechanical stop to set deceleration and travel limits, meaning it will not hold a load without live air pressure.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX30-20S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX30-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX30-20S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX30-20S Is Used
Machine Changeovers
Dial in the exact 10-30 mm travel window during product size transitions without replacing the cylinder or adding external stops.
Commissioning Calibration
Fine-tune the retract end-position precisely during setup to perfect the stroke length on the factory floor.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX30-20S the Right Cylinder?
Choose this adjustable-stroke model over a fixed SAI cylinder when your application requires variable end-stops or frequent machine changeovers without swapping hardware. If you need less force, stepping down to an 80 mm bore yields 2513 N at 0.5 MPa. For higher force, a 125 mm bore provides 6136 N.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 30 mm stroke, 20 mm adjustment, PT G1/2 ports, and the -S magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. Because the rear adjuster is a travel stop and not a lock, use an external rod lock or pilot-operated check valve for position holding without live pressure.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX30-20S FAQ
The SAIJ100X30-20-S has a 30 mm nominal stroke with a 20 mm rear adjuster, creating a usable travel window of 10-30 mm. The rear screw acts as a stop to shorten the effective stroke as needed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX30-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.