
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX300-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 300mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X300-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that permits fine-tuning the retract end position. With a 300 mm nominal stroke and a 40 mm adjustment range, it provides a usable travel window of 260 to 300 mm. This allows operators to dial in the exact end-stop during commissioning or product changeovers without adding external stops or swapping the cylinder.
The piston rod uses SUS420J2 stainless steel (code A) for corrosion resistance, and the PT tapered port threads ensure a tight pneumatic seal. The extruded aluminum barrel includes sensor grooves on both sides, though this specific configuration omits the -S magnet, so position sensing requires external switches rather than embedded CMSE or DMSE sensors.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX300-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reposition the retract end-stop within the 260-300 mm window when switching a production line to a different product size.
Fine-tune the exact end-of-stroke position during initial machine setup without physically swapping out the entire actuator.
An adjustable stroke is ideal here over a fixed SAI model when machinery processes varying product sizes and needs a variable end-stop. To replace an existing ISO 15552 cylinder, match the 100 mm bore, 300 mm stroke, 40 mm adjustment, PT port threads, and the selected mounting option from the SAIJ set: Basic, FA, LB, TC, FTC, TCM1, or TCM2 (FB, CA, CB, and CR are omitted).
Because the stroke is 300 mm, the 25 mm rod diameter should be paired with an external guide to prevent excessive side-loading on the piston. Remember that the rear adjuster is a travel stop, not a lock; the SAIJ100X300-40 cannot hold a load without live air pressure, so for fail-safe load holding, consider an external rod lock, a pilot-operated check valve, or AirTAC SAIL and BSAI cylinders.
Quick checklist
At 0.9 MPa, the push force increases to 7068 N.
The rear adjuster acts as an external stopper that lets you shorten the effective stroke by up to 40 mm. This creates a usable travel window of 260 to 300 mm, allowing precise end-position tuning without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.