Airtac SAIJ100 Adjustable Cylinder SAIJ100AX35-10
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX35-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 35mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke35 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX35-10
The AirTAC SAIJ100X35-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel within a 25-35 mm window.
This model uses PT tapered port threading (G1/2) and offers variable air cushioning at both ends to manage end-of-stroke impact. The rear adjustment screw acts purely as a mechanical stop for position tuning and does not hold the load without live air pressure.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX35-10 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX35-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX35-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX35-10 Is Used
Machine Setup Tuning
Dial in the exact 25-35 mm retract stop during commissioning to perfect end-position alignment without external spacers.
Product Changeover
Quickly adapt the travel end-stop on a packaging line when switching to a slightly different product size.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX35-10 the Right Cylinder?
Choose this 100 mm bore when the 50 mm bore class (982 N at 0.5 MPa) is insufficient for your workpiece handling. An adjustable stroke is ideal for machine setup and product changeover, letting you dial in the exact 25-35 mm end position without swapping cylinders or adding external stops. For load-holding without continuous air pressure, use an SAIL or BSAI cylinder instead of relying on the adjuster. When replacing an ISO 15552 cylinder, match the 100 mm bore, 35 mm stroke, 10 mm adjustment, PT G1/2 port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX35-10 FAQ
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster screw lets you shorten the 35 mm nominal stroke by up to 10 mm, providing a usable travel window of 25-35 mm to fine-tune the end position without replacing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX35-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.