Airtac SAIJ100 Adjustable Cylinder SAIJ100AX35-10S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100AX35-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 35mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke35 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX35-10S
The AirTAC SAIJ100X35-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 25 to 35 mm for precision end-position tuning. This variant features a SUS420J2 stainless steel rod (code A) and includes a magnet for seamless integration with AirTAC CMSE reed and DMSE electronic sensors.
Unlike fixed-stroke alternatives, this adjustable model allows you to dial in the exact retract stop during commissioning without swapping out the entire cylinder. The rear adjuster acts purely as a mechanical stop to set the travel end and relies on the integrated air cushions for deceleration; it does not hold the load without live air pressure. For applications requiring position holding without continuous pneumatic pressure, consider the SAIL or BSAI series instead.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX35-10S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100AX35-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100AX35-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX35-10S Is Used
Short-Stroke Pressing
Dial in the exact 25-35 mm travel end for pressing operations, ensuring precise contact force without relocating external physical stops.
Machine Changeover
Quickly adapt the retract position during product size changes on a packaging line by turning the rear adjuster up to 10 mm.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100AX35-10S the Right Cylinder?
The 10 mm adjustment range is ideal for fine-tuning short-stroke operations during machine setup or product changeover. When configuring an ISO 15552 replacement, match the 100 mm bore, 35 mm nominal stroke, PT tapered port threads, and the -S magnet requirement. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR configurations.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100AX35-10S FAQ
At the maximum 1.0 MPa pressure, it can deliver up to 801 kgf.
The rear adjuster acts as a mechanical stop that allows you to shorten the 35 mm nominal stroke by up to 10 mm, creating a usable travel window of 25 to 35 mm. It sets the end position but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100AX35-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.